@article{oai:iot.repo.nii.ac.jp:00000206,
 author = {齊藤, 雅仁 and 澤本, 武博 and 舌間, 孝一郎 and 樋口, 正典 and SAITO, Masato and SAWAMOTO, Takehiro and SHITAMA, Koichiro and HIGUCHI, Masanori},
 issue = {8},
 journal = {ものつくり大学紀要, The Bulletin of INSTITUTE OF TECHNOLOGISTS},
 month = {},
 note = {The properties of concrete surface which influence the durability of concrete structures will be greatly affected on curing conditions and use environments. In this study, the effects of type of cement, demolding timing, curing method and use environment on surface properties of concrete were investigated. As a result, curing method supplying water from outside of the concrete was most effective to do the coefficient of air permeability small in case of the normal portland cement was used. Curing method which didn’t make water dry from the concrete surface was effective to do the coefficient of air permeability small in case of the portland-blast furnace slag cement typeB was used. About the use environment, the coefficient of air permeability of the concrete pillar member under outdoor environment was smaller than that of the pillar member under indoor environment, and it was conspicuous by using the portland-blast furnace slag cement typeB compared with the normal portland cement. When the type of cement, curing method and the use environment were different, there was no clear correlation between the coefficient of air permeability and the compressive strength. Therefore, the durability of the concrete can't be judged by only the strength, and it is better to measure gaseous passage resistance directly., 本研究では，普通ポルトランドセメントおよび高炉セメントB 種を用いたコンクリート柱部材を作製し，脱型時期，養生方法および使用環境を変化させた場合の透気係数，含水率，圧縮強度および反発度の関係について検討した．},
 pages = {1--8},
 title = {コンクリート柱部材の表層品質に及ぼす養生方法および使用環境の影響},
 year = {2018},
 yomi = {サイトウ, マサト and サワモト, タケヒロ and シタマ, コウイチロウ and ヒグチ, マサノリ}
}